The Control4® DIN-Rail 8-Channel 0-10V Dimmer controls up to eight (8) 0-10V dimmable fluorescent ballasts or LEDs. Each channel can control up to 50 ballasts. Individual 0-10V lights can be programmatically tied to a corresponding channel on a Control4® DIN-Rail 8-Channel Relay module for on/off control of the ballast or LED when needed. Alternatively, the Control4 8-Channel 0-10V Dimmer module also has eight (8) low-voltage outputs for triggering external power relays.
Controls up to eight 0-10V dimmable fluorescent ballasts or LEDs
Sink up to 100mA per channel for control of up to 50 ballasts or source up to 25mA per channel for control of up to 12 ballasts
Eight low-voltage outputs for triggering external power relays
Channel buttons allow for toggling on/off or ramping up/down a load
Channel status LEDs indicate whether a load is on or off
Module override button allows toggling between the module override scene and all channels off or setting the module override scene to current channel levels
Module status LED indicates if module power is on with normal operation or off
Auxiliary override connection allows a standard line-voltage toggle switch to control the attached lights before the control system is installed or in case the controller malfunctions
Module can be installed in either a Control4 5-Slot or 2-Slot Panel or in a third-party DIN-Rail Panel
Data Sheet
Installation Manual
CAD Drawings
Start with the customer – find out what they want and give it to them.
